The Goulds GS series Submersible pump for 4” and Larger Wells features an AISI 304 SS Stainless Steel casing , 60 HZ,  1/2 to 5 HP, VFD compatible and up to 80 HZ.

Features

• Back pullout design for service without disturbing piping.Premium quality stainless steel internal check valve helps to minimize water loss
• Convenient Serviceability:The GS features longer thread engagement in the casing for greater strength and convenient repairs
• The Guardian System: Includes an engineered polymer bearing which is resistant to damage from sand, abrasives, and over-pumping a well.
• Dual Surface Upthrust Washer providing improved protection to the internal components during upthrust
• NSF61 Certification and Lead Free

Powered for Continuous Operation

All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.

Field Serviceable

Units have left hand threads and are field serviceable with common tools and readily available repair parts.

Sand Handling Design

Goulds face clearance, floating impeller stack has proven itself for over 50 years as a superior sand handling, durable pump design.

FDA Compliant Non-Metallic Parts

Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.

Discharge Head/Check Valve

Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation.

Motor Adapter

Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.

Stainless Steel Casing

Polished stainless steel is strong and corrosion resistant.

CentriPro Motor

• Designed and sized for installation in 4" diameter or larger water wells
• Three wire motors are a capacitor start induction run design and require a control box with a starting relay and capacitor.
• Glass filled engineered composite impellers and diffusers deliver excellent abrasion resistance.
• Use the CSCR capacitor start/capacitor run control boxes on ½ - 1 HP motors to increase efficiency and motor life and reduce energy consumption.
• The 1½ HP and larger control boxes are all CSCR type.
• Power Lead (14 AWG): Removable and replaceable motor leads are held in place by two (2) stainless steel screws for positive compression and sealing. Leads are furnished with motors and are also available as replacement parts.
• Control Box: Required on single phase 3 wire models, available in quick disconnect or more efficient CSCR designs
• Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench

Water Temperature Rating: Rated for continuous duty 86ºF (30º C)

Nomenclature of GS Models

Please refer to the image below for codification. Click on the image to expand

Summary of Goulds 5GS models

Goulds GS series Documents View