The Bonomi DA97L150 package, includes both the Valve and Actuator, details of each are listed below:

Valve

The 97 Series is a multi-directional combination flow control ball valve. Being a four seated design allows perfect ball alignment, and bi-directional flow as well as shut-off capabilities. The direct mount design and the four seats also allow a consistent torque at all times, when automating.

Features a multi-chevron style stem packing as a primary seal, and a back-up Viton® O-Ring as a secondary one, for maximum protection against stem leakage. This valve with its four seat design is ideal for a variety of applications including mixing, flow diversion and shut-off. In addition it reduces the need for multiple valves in a piping system.

The Bonomi 97L150 type Stainless Steel Flanged ANSI 150 L port 3-Way Full Port Ball Valve Features:

• ANSI 150 Full port flanged
• Temperature range -4°F to 366°F (°C -20 - 186)
• ISO 5211 mounting pad
• Reinforced TFE seats and seals
• Multiple chevron style stem packing
• Investment cast and sand cast body construction
• Meets International Standards
• 1000 PSI WOG
• There are 2 versions of this valve:
• Model 97L150 L-Port and 97T150 T-Port both Available in Sizes 1/2" to 6"

Detailed Valve Specifications

Please refer to the image below for specification. Click on the image to expand

Actuator

The Package actuator contains the Valbia 82 series DA (Double Acting)

Valbia manufactures rack and pinion pneumatic actuators, available in spring return or double acting version, with 0°-90° standard rotation or 0°-180°, and are standardly furnished with VITON seals. Valbia offers a product with a unique patented design, which is able to guarantee high quality standard, performance and reliability.Valbia actuators are versatile and suitable to different applications and operating conditions.
Valbia pneumatic actuators are available in three versions:

• The 82 series aluminum with 0°-90° rotation
• The 83 series aluminum with 0°-180° rotation
• The 84 series stainless steel with 0°-90° rotation

The 82 series, with an extruded and hard anodized aluminum body, is manufactured in 15 models to guarantee a wide range of choice according to the requested torque; it allows a 0°-90° rotation and is available in the spring return (SR) or double acting (DA) versions.

Actuator Features

• Concentric spring sets
• Die cast aluminum end caps
• Solid steel barstock pinion (not casting)
• 0°-90° rotation adjustment cam
• 0°-90° rotation adjustment bolts
• POM piston guides
• Mininum air pressure rating: 80 psi Max: 116 psi
• Working temperature: -4°F - 302°F
• No lubrication maintenance required for the entire actuator lifetime

Valve Size with Actuator DA (Double Acting)

Actuator Sizing For Double Acting

The torque of a double acting actuator remains consistent throughout the complete action. The actuator can be sized using the following guidelines as to the manufacturer's suggested settings:

• Define the maximum torque of the valve
• Increase the torque value by 25% to 50% to add a safety factory (subject to the valve and working conditions)
• Use the torque chart below to considering the available air pressure find a torque value exact to or exceeding the one obtained.
• Move horizontally in the chart below to find sufficient actuator output torque. Please click on the table below to expand,

DA - Double Acting Torque chart