Features and Benefits
NSF 61 Certified - Featuring the NSF 61 certification, ensuring safety when used in drinking water systems.
Serviceability
- A back pullout design allows for disassembly of pumps for service without disturbing the piping.
- A two compartment motor provides easy access to wiring and components, further helping to simply matching the supply voltage with the motor voltage.
- Nozzle clean out plug in pump case.
- Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.
- O-ring casing seal
Drain Plug - For ease of winterizing and maintenance.
Diffuser (Guidevane) - Bolt down diffuser provides positive alignment with impeller. FDA compliant, injection molded, glass-filled engineered composite for durability and abrasion resistance.
Corrosion Resistant - Electrophoretic painting, or e-coating on all cast iron parts reduces rusting inside and out, ensuring a longer life when used in outdoor applications.
Seal Housing - Engineered composite. Corrosion and abrasion resistant.
Impeller - F.D.A. compliant, glass filled engineered composite. Corrosion and abrasion resistant.
Diffuser (Guidevane) - F.D.A. compliant, injection molded, food grade, glass filled engineered composite for durability and abrasion resistance.
Tubing and Fittings - F.D.A. compliant engineered plastic is corrosion and U.V. resistant.
UL 778 Listed - For Outdoor Use
Powered for Continuous Operation - Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.
Excellent Air Handling Ability - After initial priming the pump has the ability to reprime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve.
Applications Specifically designed for the following uses
- Homes
- Cottages
- Booster service
Summary of JRS models
Model |
JRS5 |
JRS7 |
JRS10 |
HP |
½ |
¾ |
1 |
Length “L” |
10.81 |
11.56 |
11.81 |
Width |
9.15 |
9.15 |
9.15 |
Height |
8 |
8 |
8 |
Voltage |
115/230 |
115/230 |
115/230 |
GPM (Max) |
27 |
27 |
27 |
Weight |
37 |
42 |
47 |
Pump
- Pipe connections: 1¼” suction and 1” discharge
- Pressure switch: AS4 preset (30-50 PSI)
- EPDM elastomers NSF approved
Motor
- NEMA service factors
- 60 Hz
- ½ – 1 HP, 115/230 V capacitor start
- Single phase
- Built-in overload with automatic reset.
- 3500 RPM
- Stainless steel shaft
- Rotation: clockwise when viewed from motor end
Goulds JRS series
Goulds Jet Pump Series |
Goulds JRS Series Technical |
|
Goulds JRS Series Technical
|