The Valbia 86 series Electric Actuator with an Aluminum Alloy Enclosure with Polyester coating Model 86L11003VB030M 12V DC standard version offers a rotation a 90°. 

Actuator Features

• Valbia electric actuators are suitable for the automation of a great variety of ball and butterfly valves
• The motor adjusts its speed at the load variations in order to consistently maintain the specified cycle time
• The torque limiter and the heaters are both included in the standard version and are always automatically operating when the actuator is powered, to ensure a continuous protection against condensation and over-torque
• The gear train is made of two steel and techno-polymer gear wheels, inserted in a strong die-cast aluminum structure and sustained by hardened steel pinions mounted on self-lubricating bushes, to provide a strong mechanical construction
• The Valbia electric actuators are all designed with an ISO 5211 standard bottom connection pattern, in order to allow the direct mount of all ISO 5211 designed valves
• The 85 series actuators feature a techno polymer enclosure
• The 86 series actuators feature a powder coated aluminum enclosure
• With positioner 4-20 mA, 20-4 mA or 10-0V and On/Off fail in place.
• Actuator Approvals: CE, UL & CSA
• Auxiliary Limit Switches: n°2 STD (type SPOT)
• Rotation 90°

Special version with std (4-20mA or 0-10 V) or reverse (20-4mA or 10-0V) positioner

The modulating version can be controlled by a current (4-20 mA) or voltage (0-10V) command. The proportional control allows a resolution command of 0.9°, with a positioning tolerance of less than 1% of the potentiometer full scale.

The Torque (in lbs.) ranges from 266 to 3100 depending on the model, please refer to the table below and the attached ISO 5211 sizing (F03 to F10) in the Attachments Tab.

Actuator - Valbia 86 Series Technical Data