The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break.

EAX880 Available Options

• Standard On/Off
• 4~20mA Positioner
• Power Options: 24V AC/DC, 110V AC 220V AC

Specifications

The Bonomi EAX series explosion-proof rugged electric actuator is ideally suited for all hazardous conditions where an ignitable concen-
tration of flammable gasses, liquids, combustible fibers or dust are likely to exist.
The EAX series is certified for these areas under Class I, Division 1, Class II, Division I under CSA. This series meets NEMA 4x, 7, 8 and 9.
The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break

Explosion Proof Actuator Features

• NEMA 4x, 7, 8 & 9 (CSA Approved)
• Enclosure conforms to IP68 with explosion-protected performance and 1/2” FNPT conduit connection
• Temperature range: -22°F to 158°F (
• Clutch-less Manual Override
• Thermostatically controlled anti-condensation heater for working conditions
• Available in both ON/OFF (-00*) or 4~20 mA MODULATING (-02*)
• 30% Duty Cycle (ON/OFF) and 75% Duty Cycle (MODULATING)
• ISO 5211 Mounting Bolt Pattern and DIN 3337 Double Square Drive
• ± 5° Mechanical stop on 0° and 90°
• Continuous mechanical position indicator
• Built-in thermal overload protection prevents motor burnout
• 2 auxiliary SPDT switches

Bonomi EAX Series Actuators

Please click on the image below to expand