The Bonomi EXME722V17 package, includes both the Valve and Actuator, details of each are listed below:

Valve

The Bonomi Valpres 722V17 Series Carbon Steel ANSI Class 150 Wafer Flanged Ball Valve Direct Mount Features:

• Temperature range -4°F to 366°F  (°C -20 - 186)
• Full port
• Blow-out proof stem
• TFM-MPTFE ball seats PTFE V-pack stem packing graphoil stem seat
• Space Saving design
• 100% Tested
• Fugitive emissions 15848 tested
• ANSI B16.34 design
• ISO 5211 mounting pad with double "D" Stem
• Locking handles available
• Fire Safe Certified to EN ISO 10497 and API 607
• Sizes 1/2" to 4"

V-Pack stem

• This type of Shaft seal utilizes polymers in substitution of elastometers.
• The stem is sealed by applying an axial compression setting to a series of PTFE rings positioned between the stem and the valve body.
• The advantage of this seal is that the polymer (virgin PTFE) is not altered in contact with the fluids and can be used in many industrial applications including highly corrosive material.

Detailed Valve Specifications

Please refer to the image below for specification. Click on the image to expand

Actuator

The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break.

Specifications

The Bonomi EAX series explosion-proof rugged electric actuator is ideally suited for all hazardous conditions where an ignitable concen-
tration of flammable gasses, liquids, combustible fibers or dust are likely to exist.
The EAX series is certified for these areas under Class I, Division 1, Class II, Division I under CSA. This series meets NEMA 4x, 7, 8 and 9.
The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break

Explosion Proof Actuator Features

• NEMA 4x, 7, 8 & 9 (CSA Approved)
• Enclosure conforms to IP68 with explosion-protected performance and 1/2” FNPT conduit connection
• Temperature range: -22°F to 158°F
• Clutch-less Manual Override
• Thermostatically controlled anti-condensation heater for working conditions
• Available in both ON/OFF (-00*) or 4~20 mA MODULATING (-02*)
• 30% Duty Cycle (ON/OFF) and 75% Duty Cycle (MODULATING)
• ISO 5211 Mounting Bolt Pattern and DIN 3337 Double Square Drive
• ± 5° Mechanical stop on 0° and 90°
• Continuous mechanical position indicator
• Built-in thermal overload protection prevents motor burnout
• 2 auxiliary SPDT switches

Special version with std (4-20mA or 0-10 V) or reverse (20-4mA or 10-0V) positioner

• The modulating version can be controlled by a current (4-20 mA) or voltage (0-10V) command.
• The proportional control allows a resolution command of 0.9°, with a positioning tolerance of less than 1% of the potentiometer full scale.

Valve Size with Actuator

EAX Model Data

Please click on the image below to expand