The Bonomi EXM8E68F400 package, includes both the Valve and Actuator, details of each are listed below:

Valve

The Valpres 68F400 Split body Ball valve, Carbon Steel API608, ANSI class 600 Flanged, features:

• Carbon steel, ANSI class 600, flanged ball valve, full port Double D Stem
• API 608, ASME 816.34, ASME 816.10, ASME 816.5, ASME 81.1 design
• Temperature range -4°F to 366°F (°C -20 - 186)
• 100% tested according to API 598 standards
• RTFE seats, packing and thrust washer
• Blow-out proof stem, locking handle
• Fire Safe API 607
• Antistatic Device
• ISO 5211 mounting pad with double "D" stem"
• Locking device
• Sizes 1/2" to 2"

Detailed Valve Specifications

Please refer to the image below for specification. Click on the image to expand

Explosion Proof Actuator

The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break.

Explosion Proof Actuator Specifications

The Bonomi EAX series explosion-proof rugged electric actuator is ideally suited for all hazardous conditions where an ignitable concen-
tration of flammable gasses, liquids, combustible fibers or dust are likely to exist.
The EAX series is certified for these areas under Class I, Division 1, Class II, Division I under CSA. This series meets NEMA 4x, 7, 8 and 9.
The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break

Explosion Proof Actuator Features

• NEMA 4x, 7, 8 & 9 (CSA Approved)
• Enclosure conforms to IP68 with explosion-protected performance and 1/2” FNPT conduit connection
• Temperature range: -22°F to 158°F
• Clutch-less Manual Override
• Thermostatically controlled anti-condensation heater for working conditions
• Available in both ON/OFF (-00*) or 4~20 mA MODULATING (-02*)
• 30% Duty Cycle (ON/OFF) and 75% Duty Cycle (MODULATING)
• ISO 5211 Mounting Bolt Pattern and DIN 3337 Double Square Drive
• ± 5° Mechanical stop on 0° and 90°
• Continuous mechanical position indicator
• Built-in thermal overload protection prevents motor burnout
• 2 auxiliary SPDT switches

Special version with std (4-20mA or 0-10 V) or reverse (20-4mA or 10-0V) positioner

• The modulating version can be controlled by a current (4-20 mA) or voltage (0-10V) command.
• The proportional control allows a resolution command of 0.9°, with a positioning tolerance of less than 1% of the potentiometer full scale.

Valve Size with Actuator

Bonomi EAX Model Data

Please click on the image below to expand