The Bonomi EXM8E0730 package, includes both the Valve and Actuator, details of each are listed below:

Valve

The Bonomi Series 730LL Series 3-piece Stainless Steel and FNPT Threaded Ball Valve Full port High Performance 2-Way Features:

• Class 900 sizes 1/4” to 2”, class 600 sizes 2 1/2”- 4”
• Carbon steel-2220 psi, Stainless steel-2160 psi (1/4” - 2”), carbon steel-1480 psi, Stainless steel-1440 psi (2 1/2” - 4”)
• Working steam pressure to 250 psi.
• Temperature range: -50°F to 550°F (°C -46 to 288)
• ISO 5211 mounting pad/square stem
• TFM-4215 ball seats
• Standard latch locking handle
• Conforms to ANSI 16.34, ANSI B1.20.1 thread depths, NACE MR0175
• Fire Safe to API 607
• Grounded ball and stem
• Standard 316 stainless steel ball and stem in carbon steel models
• Available in Full port Sizes with Peek Seats 1/4" to 4"

Carbon Steel Series Connections

• 630LL NPT Threaded
• 631LL Socket Weld
• 632LL Butt Weld

Stainless Steel Series Connections

• 730LL NPT Threaded
• 731LL Socket Weld
• 732LL Butt Weld

Detailed Valve Specification

Please refer to the table below for specification. Click on the image below to expand

Actuator

The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break.

Specifications

The Bonomi EAX series explosion-proof rugged electric actuator is ideally suited for all hazardous conditions where an ignitable concentration of flammable gasses, liquids, combustible fibers or dust are likely to exist. The EAX series is certified for these areas under Class I, Division 1, Class II, Division I under CSA. This series meets NEMA 4x, 7, 8 and 9.

The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break

Explosion Proof Actuator Features

• NEMA 4x, 7, 8 & 9 (CSA Approved)
• Enclosure conforms to IP68 with explosion-protected performance and 1/2” FNPT conduit connection
• Temperature range: -22°F to 158°F
• Clutch-less Manual Override
• Thermostatically controlled anti-condensation heater for working conditions
• Available in both ON/OFF (-00*) or 4~20 mA MODULATING (-02*)
• 30% Duty Cycle (ON/OFF) and 75% Duty Cycle (MODULATING)
• ISO 5211 Mounting Bolt Pattern and DIN 3337 Double Square Drive
• ± 5° Mechanical stop on 0° and 90°
• Continuous mechanical position indicator
• Built-in thermal overload protection prevents motor burnout
• 2 auxiliary SPDT switches

Special version with std (4-20mA or 0-10 V) or reverse (20-4mA or 10-0V) positioner

• The modulating version can be controlled by a current (4-20 mA) or voltage (0-10V) command.
• The proportional control allows a resolution command of 0.9°, with a positioning tolerance of less than 1% of the potentiometer full scale.

Valve Size with Corresponding Actuator Reference

EAX Model Data

Please click on the image below to expand