The Bonomi EXM8E069 package, includes both the Valve and Actuator, details of each are listed below:

Valve

The Bonomi Series 955N Stainless Steel 3-Way Ball Valve FNPT Threaded, Direct mount Reduced "T" port Ball Valve Features:

• Working Pressure is 1000 psi (1/4" to 1") and 800 psi (1 1/4" to 3")
• Temperature range -20°F to 450°F (°C-29 to 232)
• Self Adjusting stem packing
• Blow-out proof stem design
• 100% air tested under water at 80 PSI
• ISO 5211 mounting pad/square stem

In the same series

• Series 955N - 965N: Standard Port sizes 1/2" to 3"
• Series 956N - 966N: Full Port sizes 1/4" to 2"

Detailed Valve Specifications

Please refer to the table below for specification. Click on the image to expand

Valve Flow

A valve flow must be specified when ordering a T-Port valve, please see image below for reference.

Actuator

The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break.

Specifications

The Bonomi EAX series explosion-proof rugged electric actuator is ideally suited for all hazardous conditions where an ignitable concen-
tration of flammable gasses, liquids, combustible fibers or dust are likely to exist.
The EAX series is certified for these areas under Class I, Division 1, Class II, Division I under CSA. This series meets NEMA 4x, 7, 8 and 9.
The EAX series also standardly features an extra heavy-duty housing, two extra limit switches, a heater and thermostat, ISO 5211 bolt patterns, double square female drive, a thermal overload switch, a manual override, visual indicator, and 1/2” conduit connections. A self locking gear train eliminates the need for a motor break

Explosion Proof Actuator Features

• NEMA 4x, 7, 8 & 9 (CSA Approved)
• Enclosure conforms to IP68 with explosion-protected performance and 1/2” FNPT conduit connection
• Temperature range: -22°F to 158°F
• Clutch-less Manual Override
• Thermostatically controlled anti-condensation heater for working conditions
• Available in both ON/OFF (-00*) or 4~20 mA MODULATING (-02*)
• 30% Duty Cycle (ON/OFF) and 75% Duty Cycle (MODULATING)
• ISO 5211 Mounting Bolt Pattern and DIN 3337 Double Square Drive
• ± 5° Mechanical stop on 0° and 90°
• Continuous mechanical position indicator
• Built-in thermal overload protection prevents motor burnout
• 2 auxiliary SPDT switches

Special version with std (4-20mA or 0-10 V) or reverse (20-4mA or 10-0V) positioner

• The modulating version can be controlled by a current (4-20 mA) or voltage (0-10V) command.
• The proportional control allows a resolution command of 0.9°, with a positioning tolerance of less than 1% of the potentiometer full scale.

Valve Size with Actuator

EAX Model Data

Please click on the image below to expand