Features
Self Priming Design - Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe.
Easy Servicability
- Back pullout design allows disassembly of pump for service without disturbing piping
- Two compartment motor for easy access to motor wiring and replaceable components
Diffuser (Guidevane) - Bolt down diffuser provides positive alignment with impeller. FDA compliant, injection molded, glass-filled engineered composite for durability and abrasion resistance.
Corrosion Resistant - Electrocoat paint process is applied inside and out, then baked on.
Impeller
- Standard - glass-filled, abrasion resistant engineered composite
- Optional - Silicon brass is available (lead content is < .05%)
Casing - Cast iron, 4-bolt, back pullout design. Openings for vacuum gauge and casing drain.
Powered for Continuous Operation - Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.
Mechanical Seal - Carbon/ceramic faces, Buna elastomers. 300 series stainless steel metal parts. Diaphragm prevents the seal from running dry.
Specifications of 3 Phase models
Model |
GT073 |
GT103 |
GT153 |
GT203 |
GT303 |
HP |
¾ |
1 |
1½ |
2 |
3 |
Length “L” |
19 |
19 ¾ |
20 1⁄16 |
20 13⁄16 |
21 3⁄16 |
Width |
8 ¼ |
8 ¼ |
8 ¼ |
8 ¼ |
8 ¼ |
Voltage |
208-230/460 |
208-230/460 |
208-230/460 |
208-230/460 |
208-230/460 |
Full load Amps |
3.1-2.8/1.4 |
4-3.6/1.8 |
5.7-5.2/2.6 |
7.5-6.8/3.4 |
10.6-9.6/4.8 |
Best Efficiency Flow |
40 gpm |
50 gpm |
50 gpm |
60 gpm |
70 gpm |
Best Efficiency Head (feet) |
60' |
55' |
92' |
97' |
102' |
Shut Off Pressure (psi) |
45 |
51 |
53 |
55 |
56 |
Weight (lbs.) |
49 |
52 |
55 |
69 |
71 |
Pump
- Pipe connections: 1½” NPT suction 1½” NPT discharge
- Capacities: to 110 gpm at 5 foot suction lift
- Heads: to 128 feet
- Reprime capabilities: to 25 feet suction lift
- Maximum water temperature: 140° F (60° C)
- Maximum working pressure: 125 psi
- Rotation: clockwise when viewed from motor end.
- Shut Off Pressure
Motor
- Standard motors are NEMA standard, 3500 RPM, open drip proof enclosure
- 60 Hz, 3500 rpm
- Stainless steel shaft
- Built-in overload with automatic reset.
Goulds IRRI-GATOR series
Goulds GT-IRRIGATOR Technical Specs |
Goulds IRRI-GATOR Instructions |
Goulds GT-IRRIGATOR Technical Specs.
|
|